Bambu Lab A1 3D Printer with AMS

Bambu Lab A1 3D Printer with AMS

  

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle.
Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.



 

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level,
vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.


Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor.
This compensates for the unwanted harshness of motor noise.

Body
Build Volume: 256*256*256 mm³
Chassis: Steel + Extruded Aluminum

ToolHead
Hot End: All-Metal
Extruder Gears: Hardened Steel
Nozzle: Stainless Steel
Max Hot End Temperature: 300 ℃
Nozzle Diameter (Included): 0.4 mm
Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm

Heatbed
Compatible Build Plate:
Bambu Textured PEI Plate
Bambu Smooth PEI Plate
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build PlateTemperature 100 ℃

Speed
Max Speed of Toolhead: 500 mm/s
Max Acceleration of Toolhead: 10000mm/s²
Max Hot End Flow: 28 mm³/s @ABS (Model: 150*150 mm single wall;
Material: Bambu ABS; Temperature: 280 ℃

Cooling
Part Cooling Fan: Closed Loop Control
Hot End Fan: Closed Loop Control

Supported Filament
PLA, PETG, TPU, PVA: Ideal
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended

Sensors
Monitoring Camera: Low Rate Camera (up to1080P)  Timelapse Supported
Filament Run Out Sensor: Yes
Filament Odometry: Yes
Power Loss Recover: Yes
Filament Tangle Sensor: Yes

Physical Dimensions
Dimensions: 385*410*430mm³
Net Weight : 8.3 kg

Electrical Parameters
Input Voltage: 100-240 VAC, 50/60 Hz
Max Power: 1300W@220V， 350W@110V

Electronics
Display: 3.5 inches 320*240 IPS Touch Screen
Connectivity: Wi-Fi, Bambu-Bus
Storage: Micro SD Card
Control Interface: Touch Screen, APP, PC Application
Motion Controller: Dual-Core Cortex M4

Software
Slicer: Bambu Studio Support third party slicers which export standard
Gcode such as Superslicer, Prusaslicer and Cura, but certain advanced features may not be supported.
Slicer Supported OS: MacOS, Windows

Wi-Fi
Frequency Range:
2412 MHz - 2472 MHz (CE)
2412 MHz - 2462 MHz (FCC)
2400 MHz - 2483.5 MHz (SRRC)
Transmitter Power (EIRP):
≤ 21.5 dBm (FCC) 
≤ 20 dBm (CE/SRRC)
Protocol: IEEE 802.11 b/g/n