Δέκτες

ELRS-R24-S Specifications ESP8285, SX1280/1281IMLTRT PA/LNA: AT2401C molex 479480001 SMT antenna RF Frequency: 2.4GHz ISM Telemetry power: 20dbm AT2401C Rx_gain: 12dB Receiver protocol: CRSF Input voltage: 4~9V DC @ 5V pad Power dissipation:  40~45mA(before binding), 60~65mA(binding), 90~95mA(wifi mode) PCB size: 21mm x 15mm Weight: 1.2g Packing: 1x ELRS-R24-S Firmwares ExpressLRS MATEK_2400_RX Firmware update via UART or WIFI ELRS-R24-S:  disable “USE_DIVERSITY” (unchecked) when flashing in ExpressLRS configurator Quick Star and Tips Any ELRS 2.4Ghz receivers can work with any ELRS 2.4Ghz TX Modules, from any manufacturer and even the DIY ones. This is as long as they have the same binding phrase and configuration options (Regulatory Domain, Performance Options and Extra Data).” More details about ExpressLRS, pls check out  ExpressLRS wiki Receivers have ExpressLRS fw preloaded with BINDING_PHRASE for QC,  the Receiver will never ent..

DESCRIPTION The 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size. Specifications: Item Name: EP1 Nano Receiver Type: ISM ESP8285 MCU SX1280IMLTRT RF Module Omnidirectional antenna Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate..

DESCRIPTION 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.  The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size. Specifications: Item Name: EP2 Nano Receiver Type: ISM ESP8285 MCU SX1280IMLTRT RF Module SMD Ceramic antenna Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz ..

ELRS-R24-D Specifications ESP8285, SX1280/1281IMLTRT PA/LNA: SE2431L Antenna connector: IPEX MHF 1 RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: 22.5dbm~23dbm SE2431L RX_gain: 12.5dB Diversity (antenna-switching), default ANT2 Receiver protocol: CRSF Input voltage: 4~9V DC @ 5V pad Power dissipation:  40~45mA(before binding), 70~75mA(binding), 90~95mA(wifi mode) PCB size: 21mm x 15mm Weight: 3g w/ 2x antennas Packing: 1x ELRS-R24-D,   2x IPEX MHF1 Antennas Firmwares ExpressLRS 1.x & 2.x,  MATEK 2400 RX  enable “USE_DIVERSITY ExpressLRS 3.x or newer, MATEK R24-D 2.4GHz RX Firmware update via UART or WIFI Quick Star and Tips Any ELRS 2.4Ghz receivers can work with any ELRS 2.4Ghz TX Modules, from any manufacturer and even the DIY ones. This is as long as they have the same binding phrase and configuration options (Regulatory Domain, Performance Options and Extra Data).” More details about ExpressLRS, pls check out  ExpressLRS wik..

The RadioMaster Bandit BR3 Expresslrs Receiver features a built-in a TCXO (temperature-compensated crystal oscillator) which ensures reliable, stable, and accurate signal reception for superior performance in demanding environments. Utilizing 0402 components, the BR3 ExpressLRS receiver also features superior resistance to vibration. Bandit BR3 Expresslrs Receiver features a huge 500mw of telemetry output making it ideal for long range applications. The ESP8285 MCU and SX1276 RF chip are renowned for low latency, high sensitivity and exceptional long-range performance. The included T Antenna is optimized for long range performance. Due to the low-latency and high-refresh-rate RF module, the Bandit BR3 Expresslrs Receiver is ideal for FPV freestyle or Long Range.  Features Maximum 500mW telemetry RF power Built-in TCXO oscillator Utilizing 0402 components, superior resistance to vibration Dual- Antenna for improved signal stability and range Specifications Item: Bandit BR3 Ex..